Pilates. Shower. Smooth.
Add it to the routine you already have. A few minutes after your workout shower and the sapphire-cooled IPL is done, no separate appointment needed.
Halio InfinityGlow Advanced IPL Sapphire Cooling Hair Removal Device
4.97 · 68 reviewsPay in 4 interest-free installments of $67.50 with shopPay
Full-body IPL in about ten minutes, cooled to near painless by a sapphire plate.
- Sapphire plate cools skin to 10C while it flashes
- Unlimited flashes at 0.25s per flash
- Automatic smart sensors read the area and set the level
- 5 intensity levels and 4 modes, gentle enough for the bikini area
- Full-body treatment in about 10 minutes
One Device for Every Goal
Three Steps and Done
Shave
Shave the treatment area with the included razor to remove surface hair for optimal light contact.
Activate
Select your mode, Manual for small areas or Auto for large. Hold the device at a 90 degree angle against the skin and press the flash button.
Moisturize
After your session, wait 15 minutes, then apply a gentle body lotion or soothing gel to hydrate and calm your skin.
See It in Action
Results That Feel Like Cheating
to visible results, 2 to 3 sessions a week
reported reduction in hair growth after 4 weeks
of IPL energy transmitted straight to the follicle
Cool Enough to Actually Finish
Most at-home hair removal gets abandoned because it hurts. This one holds the skin at 10C while it works, so a full-body pass is ten minutes you can sit through.
Sapphire ice cooling
Holds the plate at 10C on contact, so there is no sting and no burn.
Automatic smart sensors
Read the area and set the level for you. Hands off, no guesswork.
Unlimited flashes
No cartridge to replace and no flash count to ration. One purchase, lifetime use.
Dual Pulse
Preheats the follicle then treats it, which is what makes 0.25s flashes effective.
Effortless Enough to Keep Doing
IPL only works if you keep at it, and people stop when it hurts or takes too long. Sapphire cooling removes the sting, the smart sensor removes the setup, and a 0.25 second flash rate puts a full body pass at about ten minutes. Four modes and five intensity levels cover everything from underarms to the bikini area.
to a visible result, on a schedule of 2 to 3 sessions per week
18% reported reduction in hair growth after 4 weeks. Results vary by hair and skin tone.
Not Clinical, Not Boring
Backed by science
IPL that targets the follicle, with sapphire cooling so a full pass is comfortable.
Designed to display
Sleek enough to live on your shelf, not hide in a drawer.
Priced to own
Salon-grade hair removal you buy once, with no cartridges to replace.
From the Halioverse
After using it for 3 weeks following the instructions, my hair growth has slowed down noticeably. Some hairs can even be plucked out by hand. It works on multiple areas and is even more effective than going to a spa.
Super cool on the skin. I previously used another at-home hair removal device but it got hot, so I never dared use it for long. After switching to this one, I have used it for over 10 to 15 minutes and it still stays very cool.
The device has multiple modes and intensity levels, making it easy to use on different skin areas. I used it for the bikini area and it was quite comfortable, no pain or heat like other devices I have used.
What is the Halio InfinityGlow Advanced IPL Sapphire Cooling Hair Removal Device?
Smooth skin. Fast. At home. Forever.
The InfinityGlow is Halio's at-home IPL hair removal device with Sapphire Cooling Technology that keeps the contact surface at a cool 10°C - making it nearly painless. Full body in just 10 minutes thanks to an ultra-fast 0.25-second pulse speed. Unlimited flashes for lifelong use. 4 modes, 5 intensity levels, automatic smart sensor, multi-voltage plug for global use. Designed for men and women.
How does Sapphire Cooling Technology work?
IPL devices typically generate heat - which is what makes traditional hair removal uncomfortable. The InfinityGlow's sapphire crystal contact surface actively cools your skin to just 10°C during each flash, neutralising that heat before your skin feels it. The result: effective hair removal that's nearly painless, even on sensitive areas.
Does the InfinityGlow really have unlimited flashes?
Yes - unlimited. No flash counter, no replacement cartridge, no expiry. It's a one-time investment for lifelong smooth skin. That's the cheat code.
Is the InfinityGlow suitable for my skin tone and hair color?
IPL works by targeting melanin - the pigment in your hair. For best results: darker hair on lighter to medium skin tones.
Not effective on: white, grey, blonde, or red hair - too little melanin to target.
Not safe for: very dark skin tones - skin absorbs too much energy, increasing burn risk.
Always check the skin tone and hair color chart in your manual, and do a patch test 24 hours before your first full session.
Can men use the InfinityGlow?
Absolutely - it's designed for everyone. Legs, arms, underarms, bikini area, chest, back, and facial hair below the cheekbones. The one rule: never near the eyes, eyebrows, eyelids, or scalp.
View all FAQsShow fewer
How do I use the InfinityGlow IPL device?
1. Shave the area to be treated - no waxing or epilating
2. Choose your mode (4 options) and intensity level (5 levels) based on your skin tone
3. Place flat against skin, full contact
4. Press to flash. Glide for large areas; use precision mode for smaller, sensitive spots
5. Use every 2 days for the first month, then every 2 weeks for maintenance
6. Always patch test 24 hours before your first full session
CAUTION: Never use over tattoos, moles, or dark pigmented areas.
Do I need to wear the safety glasses? What happens if I don't?
Yes, always wear the protective goggles provided when using the InfinityGlow IPL.
IPL emits intense bursts of broad-spectrum light. While the device has a skin-contact safety sensor (it won't flash unless pressed flat against the skin), the flash is extremely bright and can cause eye discomfort or damage if you're not protected.
The goggles are included in the box for a reason - use them every session, especially when treating areas near the face.
How often should I use the InfinityGlow?
First month: every 2 days to disrupt the hair growth cycle properly.
After month one: switch to maintenance sessions every 2 weeks, adjusting based on regrowth.
Consistency is what gets you to permanently smooth. Don't skip.
Will results come faster if I use the InfinityGlow more often?
Using it more frequently than recommended won't speed up results and may actually slow them down.
IPL targets hair follicles that are in the active growth phase (anagen phase). Only about 20–30% of your hair is in this phase at any one time which is why multiple sessions spaced correctly are needed to catch all of them.
Using the device more often doesn't mean more follicles are in the right phase it just means more light on the same follicles. Stick to the schedule:
- First month: every 2 days
- After that: every 2 weeks maintenance
Consistency over the right timeline is what gives you lasting results.
How do I prepare before each IPL session?
Shave the area you wish to treat 24 hours before your session - do NOT wax or epilate. Ensure skin is clean, dry, and free from any skincare products or sunscreen. Avoid sun exposure and tanning for at least 2 weeks before treatment. Always perform a patch test before your first full session.
What intensity level should I start with?
Start low and build up - here's the guide:
LEVEL 1–2 (Low) - Start here for:
- Your first ever session (patch test included)
- Sensitive areas: upper lip, underarms, bikini line
- Darker skin tones (within the safe Fitzpatrick range)
LEVEL 3 (Medium) - Move here once your skin tolerates low:
- Legs, arms, and larger body areas after 2–3 comfortable sessions
LEVEL 4–5 (High) - For experienced users:
- Coarser or thicker hair areas (legs, chest, back)
- Only when low/medium levels feel comfortable and skin shows no irritation
KEY RULE: If it hurts or your skin turns red, go back down a level. Effective IPL should feel like a warm snap at most - never pain.
Always patch test before your first full session and allow 24 hours to check skin response before continuing.
Can I use the InfinityGlow while showering?
No, the InfinityGlow is not designed for use in the shower. Use on dry skin only. Keep the device and its components away from water except when cleaning the flash window with a dry cloth.
How soon will I see results from the InfinityGlow?
IPL works progressively - it targets hairs at different stages of their growth cycle, so each session builds on the last. Most users see visible reduction within 3 - 4 weeks. Full results typically appear after 2 - 3 months of a consistent schedule.
Why isn't the IPL working on my hair?
A few things to check:
1. Hair colour - IPL won't work on white, grey, blonde, or red hair. Not enough melanin to target.
2. Skin tone - very dark skin tones reduce effectiveness.
3. Consistency - skipped sessions mean the hair cycle resets.
4. Intensity - try increasing your level if your skin tolerates it.
Still stuck? Contact our support team.
Is IPL hair removal safe?
Yes - when used correctly. The InfinityGlow's Sapphire Cooling keeps skin at a safe 10°C. All UV is filtered out. Five intensity levels let you start low and build up. Always patch test before your first session, and never use over tattoos, moles, or raised skin irregularities.
Can I use IPL during pregnancy?
We recommend waiting. There are no studies confirming IPL safety during pregnancy. Please consult your doctor before use if you're pregnant or breastfeeding.
How do I store and care for the InfinityGlow?
After each session: wipe the flash window with a clean dry soft cloth. Store in a cool, dry place away from direct sunlight. Keep out of reach of children.
What comes in the InfinityGlow box?
Inside the box:
1 × Halio InfinityGlow Advanced IPL Sapphire Cooling Hair Removal Device
1 × Adapter
1 × User Manual
1 x Goggle
1 x Razor
What is the warranty on the InfinityGlow?
2-year one-to-one replacement warranty covering defects from faulty workmanship or materials under normal use. Full details at halio-sonic.com/pages/warranty-request.
